top of page

Load data for .219 Zipper + .224 | 40gr | Berger Varmint

Recommended Powder(s): ADI AR 2207

.219 Zipper + .224 | 40gr | Berger Varmint

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | Berger Varmint
Manufacturer SKU:
22303
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.612" | 15.5mm
Caliber:
.219 Zipper load data
Case Length (l3):
1.933" | 49.1mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.319" | 8.1mm
Shank Seated Depth:
0.319" | 8.1mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
41336 psi | 2850 bar
LID:
LID_B883_C58
Last updated:
2025-01-01

Load data for 26 loads in caliber .219 Zipper with .224 | 40gr | Berger Varmint bullet and 13 powders such as ADI AR 2207. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
83%
36013
87%
**17
99%
Accurate 2015
<<locked>>
93%
36767
89%
**07
95%
[Accurate 2495]*
<<locked>>
97%
33156
80%
**94
93%
Alliant AR-Comp
<<locked>>
97%
37115
90%
**86
97%
Alliant Reloder-10x
<<locked>>
89%
36622
89%
**33
96%
[Baschieri & Pellagri 106]*
<<locked>>
85%
36376
88%
**82
93%
Hodgdon TrailBoss
<<locked>>
97%
29124
70%
**00
100%
IMR 4198
<<locked>>
87%
36738
89%
**97
97%
Norma 200
<<locked>>
85%
36898
89%
**23
97%
ReloadSwiss RS 14
<<locked>>
96%
28703
69%
**49
100%
Vihtavuori N120
<<locked>>
86%
36492
88%
**81
100%
Vihtavuori N130
<<locked>>
91%
36883
89%
**64
95%
[Vihtavuori N133]*
<<locked>>
97%
36027
87%
**32
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33315
81%
**45
98%
[Accurate 2015]*
<<locked>>
85%
28355
69%
**51
91%
[Accurate 2495]*
<<locked>>
92%
28065
68%
**33
90%
[Alliant AR-Comp]*
<<locked>>
85%
25860
63%
**09
91%
[Alliant Reloder-10x]*
<<locked>>
81%
28036
68%
**71
91%
[Baschieri & Pellagri 106]*
<<locked>>
81%
31792
77%
**48
90%
Hodgdon TrailBoss
<<locked>>
81%
22539
55%
**10
100%
[IMR 4198]*
<<locked>>
81%
30690
74%
**07
94%
Norma 200
<<locked>>
81%
31952
77%
**86
95%
ReloadSwiss RS 14
<<locked>>
81%
22234
54%
**59
100%
Vihtavuori N120
<<locked>>
81%
31314
76%
**50
99%
[Vihtavuori N130]*
<<locked>>
81%
26527
64%
**43
90%
[Vihtavuori N133]*
<<locked>>
90%
28979
70%
**22
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page